Table of Contents
Advertisement
Getting Started
First time set-up
Once you have connected the SRT 5392 to your antenna and to your television with your preferred
video and audio connections, you need to:
1. Install the batteries in the remote control (see page 11).
2. Turn on the television.
3. Plug the SRT 5392 into mains power and turn on the power at the mains switch.
4. Turn on the SRT 5392 using the power-on switch on the back of the receiver (number 9 in the
diagram on page 9).
5. Select the video or AV input channel to which the SRT 5392 is connected: this can be done by
pressing the TV/AV or VIDEO button on your TV remote control. (Refer to your TV user's manual
for instructions.)
The Strong Technologies banner page briefly appears, followed by the Language Setting
screen.
When setting up the SRT 5392 for the first time, the system will automatically guide you through the
set-up process. You only have to perform this process once. If you have already set-up the SRT 5392
and would like to make changes to your existing set-up preferences, you can edit them from the
Setup screen on the main menu.
To set-up the receiver for the first time, you need to:
•
set the language
•
set the time
•
set the video output
•
scan for channels and stations in your area.
TIP: Throughout the set-up process, there will be on-screen instructions located at the bottom
of the screen that indicate what options are available and which buttons to press. Use this to
help you through the set-up.
Language settings
The Language Setting screen is the first screen to appear after you turn the receiver on for the first
time. This screen allows you to set the menu language, audio language, subtitle language and
teletext language. It also sets the default language.
17
Advertisement
Table of Contents
