Separate S-Video (Y/C) Connector - Strong SRT 5392 User Manual

B. Separate S-Video (Y/C) connector
If your TV has a 4-pin mini-din S-Video socket, you can connect an S-Video cable between socket
12 on the SRT 5392 and the corresponding S-Video socket on your TV. (An S-Video cable is not
supplied.)
You will need to make separate connections for left and right audio via the audio sockets in socket
set 10 on the rear of the SRT 5302. This can be done using the supplied RCA cable.
For right audio, connect the red RCA lead between the red audio socket on the SRT 5392 and the
corresponding socket on your TV.
For left audio, connect the white RCA lead between the white socket on the SRT 5392 and the
corresponding socket on your TV. These RCA audio connections will provide MPEG-2 stereo.
NOTE: Dolby digital bitstream audio S/PDIF can be achieved using a coaxial cable or an
optical cable. (These cables are not supplied.) These cables should be connected between
socket 6 (coaxial cable) or socket 11 (optical cable) on the SRT 5392 and the corresponding
S/PDIF socket on your Dolby Digital decoder amplifier. See "Output setting" on page 19 for
instructions on how to receive Dolby Digital audio.
13