Audio Language; Managing Channels; Scanning For Channels And Stations - Strong SRT 5392 User Manual

Audio language

If a channel is being broadcast in more than one audio language, you can choose which
language to listen to.
1. Press the red button on the remote control to display the Audio Language menu.
2. Press CH ▼or CH ▲ to highlight your preferred language.
3. Press OK to select the language you have chosen. The audio language will change
immediately.

Managing channels

Scanning for channels and stations

The Search Channel option on the main menu enables you to scan for digital TV and radio stations
that can be detected in your area. Once detected, the stations can be easily selected from the
remote control or by pressing the channel keys on the front panel of the SRT 5392 (see the diagram
on page 8).
When you initially set-up the SRT 5392, the channels and stations in your area were automatically
detected (see "First time set-up" on page 17). If you have moved locations, deleted channels or
stations, or if new channels and stations have become available, you will need to search for
channels and stations again. Two searching options are available:
• Automatic Search
This is the recommended option when you are first setting up the SRT 5392. It will automatically
search for all digital TV and radio stations that can be detected and stores their details.
• Manual Search
This option lets you search for a particular channel (or all channels from a specified
broadcaster).
h
Automatic Searc ing
1. Press MENU on the remote control.
2. If necessary, press VOL
3. With Automatic Search highlighted, press OK.
4. A confirmation message appears. Press OK again.
The SRT 5392 scans for channels and stations. As it finds them, it displays them (grouped by
or VOL to display the Search Channel menu.
25