Getting Started; Scanning For Channels And Stations - Strong SRT 5020 User Manual

Getting Started

Once you have connected the SRT 5020 to your antenna and to your television with your preferred
video and audio connections, you need to:
1. Install the batteries in the remote control (see page 9).
2. Turn on the television.
3. Plug the SRT 5020 into mains power and turn on the power at the mains switch.
4. Turn on the SRT 5020 using the power-on switch on the back of the receiver (number 9 in the
diagram on page 7).
5. Select the video or AV input channel to which the SRT 5020 is connected: this can be done by
pressing the TV/AV or VIDEO button on your TV remote control. (Refer to your TV user's manual
for instructions.)
The Strong Technologies banner page briefly appears, followed by the Main Menu screen
showing a list of options (see below). One of these options—Scan—is selected by default.

Scanning for channels and stations

The Scan option on the Main Menu enables you to scan for—that is, detect—digital TV and radio
stations available in your area. Once detected, the stations can be easily selected from the remote
control (or by pressing the channel keys on the front panel of the SRT 5020: see the diagram on
page 6).
You have two scanning options:
• Auto Searching
This is the recommended option when you are first setting up your SRT 5020. The SRT 5020 will
automatically search for all digital TV and radio stations it can detect and stores their details.
When the Main Menu first appears, the Auto Searching option is highlighted (which indicates
that this option can be selected simply by pressing OK on the remote control).
13