PART 1 • English TABLE OF CONTENTS 1.0 INSTRUCTION 1.1 Safety Instructions 1.2 Storage 1.3 Equipment Set-up 1.4 Features & Accessories 2.0 CONNECTION 2.1 Connecting to Terrestrial Antenna 2.2 Connecting to TV and VCR 2.3 Connecting to a Digital Audio Amplifier 3.0 YOUR RECEIVER 3.1 Front Panel 3.2 Rear Panel...
Attachments - For your safety, and to avoid damaging the product, use only accessories recommended by STRONG. Water and Moisture - Never use this product around water (near a bathtub, kitchen sink, laundry tub, wet basement.
Page 6
PART 1 • English Protecting the Power Cord - The power supply cord should be placed so it will not be walked on. Never put a heavy object on the power cord or wrap it around the leg of a table or chair. Keep the area around the power cord connection points, at the power outlet, and at the product connection, free of all AC adapter or accessory power cords.
PART 1 • English Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Where the mains plug or all-pole mains switch is used as the disconnect device, the disconnect device shall remain readily operable.
Page 8
PART 1 • English Fast channel zapping: sorting by alphabet, free/encrypted channels Electronic TV Programme Guide (EPG) for on screen programme information of present/following event information up to 7 days ** 8 wake-up Timers with 4 modes (once, daily, weekly, monthly) Sleep Timer (10, 30, 60, 90, 120 min) Booking of events directly from EPG Full multi-lingual DVB subtitling and audio track support**...
PART 1 • English 2.0 CONNECTION 2.1 Connecting to Terrestrial Antenna To receive the broadcast signal, the terrestrial antenna cable should be connected to the ANT IN connector at the back of the receiver. (Fig. 1) 2.2 Connecting to TV and VCR 2.3 Connecting to a Digital Audio Amplifier Connect your Digital Audio Amplifier with the S/PDIF connector on the back of the receiver (Fig.
PART 1 • English 7. EXIT Exits from the menu or sub-menu 8. pq Menu Off: Change channel to previous/next. Menu On: Moves the cursor up/down. 9. tu Menu Off: Increases/decreases the volume level. Menu On: Change settings n specific Menus 10.
Page 11
PART 1 • English 2. Use the tu buttons to change channel group (assumed you have already set up Favourite groups). 3. With the pq buttons select the channel you want to watch. With OK you can watch the selected channel in full screen mode. 5.1.1.1 Edit Use this menu to favour, lock, skip, delete and rename channel list.
PART 1 • English Name (Z-A): Sorting in Alphabetical Order. FTA: First in the list will be Free-To-Air channels. Lock: First will be listed all unlocked and then the locked channels at the end. 5.1.1.4 Move Press the [4] button to activate the Move function. symbol, use the pq buttons to The selected channel will be marked in a move the selected channel to the desired position.
PART 1 • English 2. With the pq buttons select Auto Scan, press OK to enter the menu. 3. Press the tu buttons to change Scan mode, and use the pq to highlight Search, press OK to start auto scan. 5.2.2 Channel Scan 1.
Page 14
PART 1 • English 5.3.1 OSD Language This menu allows you to set OSD Language. 5.3.2 TV System This menu allows to setup different settings concerning your TV set. Display Mode: PAL/NTSC/AUTO Aspect Ratio: Use this menu to configure the screen aspect between: 4:3 PS (Pan&Scan), 4:3 LB (Letter Box) and 16:9 (Wide Screen) Video Output: Use this menu to switch the video output mode either to RGB...
2. Press EXIT button to exit. 5.4.1 Receiver Information This menu displays some Receiver information like Hardware, Software, Signature and Remote Control and our Web site www.strong.tv. 1. In Tools menu, select “Receiver Information” and press OK button to open receiver information window.
PART 1 • English 2. Press pq buttons to select a desired game, and press OK button to enter the game. Highlight “Start” and press OK button to start the game. For changing levels highlight “Setup” and use tu buttons. 3.
PART 1 • English 5.5.1 Media Player This function allows you to play MPEG-2, Audio and Photo files from connected USB device 1. In “Media+” menu, select “Media Player” and press OK button to enter Media Player menu. 2. Press pq buttons to select a desired item, and press OK or PLAY button to play the desired files.
PART 1 • English 3. In the event schedule, press OK button to book the selected event, press numeric button [3] to open the Detail menu for the selected event. 4. Press numeric button [1] to open the Booking list menu. 6.3 Accessing the favourite channels 1.