6. Operation
Getting Started
6.1
After your receiver is powered on, proceed with installation as follows :
➋ Antenna Setup
1. Press the MENU button to display the main menu.
2. Press OK on 'Dish Setting'. The following window will appear. <Figure 6.1.2>
3. If you have a motorized dish, press OK on 'Motorized Setting'. < Figure 6.1.3>
✽ Note: Enter a 4-Digit password if need arise. The default password is '0000'.
10
[2015.06.15]SRT4935Ⅱ Manual_english+French_NIG_rev1.0.indd 10
➊ Menu Language Setting
1. Turn on your TV and receiver.
2. The wizard menu for language selection will appear.
<Figure 6.1.1>
Select one language and press OK on proceed.
Figure 6.1.1
4. Select the item that you want to edit, and set its
parameters as desired. <Dish Setting>
▪ LNB Power: Select among ON/OFF/13V/18V.
▪ LNB Type: Select among Single/Universal/OCS
▪ LNB Freq: Set the frequency of the LNB oscillator.
▪ 22KHz: When not AUTO, set the signal path from
LNB or switch by selecting a control signal among
0/22KHz.
Figure 6.1.2
▪ DiSEqC 1.0: Select DiSEqC 1.0 Port
▪ DiSEqC 1.1: Select DiSEqC 1.1 Port
2015-06-16 오후 2:21:46