Basic Operation; Selecting A Channel - Strong SRT 5392 User Manual

Basic Operation

Selecting a channel

There are a number of ways to select a channel:
• Channel number selection buttons: If you know the channel number, enter the number using
the number keys on the remote control and then press OK. (If you don't press OK, the channel
selected still appears, but only after 2 seconds.)
NOTE: The SRT 5392 uses the Logical Channel Numbering system (LCN) by default. Some
samples of LCN channel numbers are:
1 = Ten network and affiliates
2 = ABC
3 = SBS
7 = Seven network and affiliates
9 = Nine network and affiliates
• Channel list: Press OK on the remote control. This displays the channel list. Press CH ▼or CH ▲ on
the remote control to select the channel you want and then press OK.
You can also choose to display multiple channels from the channel list and then select one for
normal viewing (as explained in "Multi-Picture mode" on page 27).
• Scroll: Press CH ▼or CH ▲ on the remote control to scroll through the channels in channel
number order. (You can also scroll through the channels in order by pressing the channel up
and channel down buttons on the front panel of the SRT 5392.)
• By EPG: Press EPG on the remote control, select the channel from the electronic program guide
(EPG), press OK and then EPG, MENU or EXIT. The EPG is explained on page 35.
• Previous channel: Press the RECALL button to display the previous channel.
TIP: You can use the same techniques to select a digital radio station.
22