Renaming Channels - Strong SRT 5392 User Manual

2. Press VOL or VOL
3. In the Edit screen, highlight Edit Channel and then press OK.
A list of your TV channels appears.
4. If you want to move a radio station rather than a TV channel, press TV/RAD on the remote
control. A list of radio stations appears. Pressing TV/RAD again redisplays the TV channels.
5. Press CH ▼or CH ▲ until the channel or station you want to move is highlighted.
6. Press the yellow button on the remote control.
This will enable you to move the channel.
7. Use CH ▼or CH ▲ to move the highlighted channel to your preferred position and then press
OK.
8. If you want to move another channel or station, repeat from step 5.
9. Press MENU or EXIT. A confirmation message appears asking you to confirm the changes you
have made.
10. Press OK to save the changes.

Renaming channels

1. Press MENU to display the main menu.
2. Press VOL or VOL
3. In the Edit screen, highlight Edit Channel and then press OK.
A list of your TV channels appears.
4. If you want to rename a radio station rather than a TV channel, press TV/RAD on the remote
control. A list of radio stations appears. Pressing TV/RAD again redisplays the TV channels.
5. Press CH ▼or CH ▲ until the channel or station you want to rename is highlighted.
6. Press the blue button on the remote control.
An on-screen keypad appears. It is in two parts: the title bar (showing the current name of the
channel) located at the top, and the keypad (showing all the characters you can select) is
located below the title bar.
7. Press VOL , VOL
character will be highlighted. Press OK to select that character. Continue to select characters
to select Edit.
to select Edit.
, CH ▼or CH ▲ to move around the on-screen keypad. The active
30