PART 1 • English TAblE Of COnTEnTS 1.0 InSTRUCTIOn 1.1 Safety Instructions 1.2 Storage 1.3 Equipment Set-up 1.4 Features & Accessories 2.0 COnnECTIOn 2.1 Connecting to TV and Terrestrial Antenna 2.2 Connecting to a Digital Audio Amplifier 3.0 YOUR RECEIvER 3.1 Front Panel 3.2 Rear Panel 3.3 Remote Control...
Attachments - For your safety, and to avoid damaging the product, use only accessories recommended by STRONG. Water and moisture - Never use this product around water (near a bathtub, kitchen sink, laundry tub, wet basement.
Page 6
PART 1 • English Protecting the Power Cord - The power supply cord should be placed so it will not be walked on. Never put a heavy object on the power cord or wrap it around the leg of a table or chair. Keep the area around the power cord connection points, at the power outlet, and at the product connection, free of all AC adapter or accessory power cords.
PART 1 • English Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Where the mains plug or all-pole mains switch is used as the disconnect device, the disconnect device shall remain readily operable.
Page 8
PART 1 • English Fast channel zapping: sorting by alphabet, free/encrypted channels Electronic TV Programme Guide (EPG) for on screen programme information of present/following event information up to 7 days ** 8 wake-up Timers with 4 modes (once, daily, weekly, monthly) Sleep Timer (10, 30, 60, 90, 120 min) Booking of events directly from EPG Full multi-lingual DVB subtitling and audio track support**...
PART 1 • English 2.0 COnnECTIOn 2.1 Connecting to Tv and Terrestrial Antenna To receive the broadcast signal, the terrestrial antenna cable should be connected to the ANT IN connector at the back of the receiver. (Fig. 1) 2.2 Connecting to a Digital Audio Amplifier Connect your Digital Audio Amplifier with the S/PDIF connector on the back of the receiver (Fig.
PART 1 • English 9. EXIT Exits from the menu or sub-menu 10. pq Menu Off: Change channel to previous/next. Menu On: Moves the cursor up/down. 11. tu Menu Off: Increases/decreases the volume level. Menu On: Change settings n specific Menus 12.
Page 11
PART 1 • English 5.1.1 Tv Channel list 1. In Channel submenu select TV Channel List with the pq buttons and press OK to enter. 2. Use the tu buttons to change channel group (assumed you have already set up Favourite groups). 3.
Page 12
PART 1 • English 5.1.1.3 Sort Press the [3] button in to enter Sort menu. Use the pq buttons to highlight desired sort way and press OK to confirm. Default: Sorting by searched Order (from lowest to highest frequency). Name (A-Z): Sorting in Alphabetical Order.
PART 1 • English 5.2 Installation 5.2.1 Auto Scan 1. Use the pq buttons to select Installation, press OK button to enter menu. 2. With the pq buttons select Auto Scan, press OK to enter the menu. 3. Press the tu buttons to change Scan mode, and use the pq to highlight Search, press OK to start auto scan.
Page 14
PART 1 • English better overview if press OK first. Now you can select desired setting by pq buttons and confirm it with OK. 2. Press EXIT button to exit. 5.3.1 OSD language This menu allows you to set OSD Language. 5.3.2 Subtitles preference This menu allows you to set preferred Subtitles Language and select Subtitles Type between Normal and Hard of Hearing.
PART 1 • English Wake-up Channel: You can select a desired channel as wake-up channel. Month/Date/Day: Press pq buttons to select your desired month, date and day (if active). Time: Press OK to input the time with the numeric buttons. When you want to quit programme timer, a saving window appears, with tu select Yes in the confirmation window and press OK to save or select No to cancel.
Page 16
2. Press EXIT button to exit. 5.4.1 Receiver Information This menu displays some Receiver information like Hardware, Software, Build Date and our Web site www.strong.tv. 1. In Tools menu, select “Receiver Information” and press OK button to open receiver information window.
This receiver has foreseen an over the air update function, which might not be available at your local broadcast conditions. For further details visit our website www.strong.tv or contact your local Serviceline. 5.5 media+ 1. Press mEnU button to enter main menu. Select “Media+” and press OK button to enter Media+ menu.
PART 1 • English 6.0 OPERATIOn 6.1 Changing Channels There are 4 ways of channel selection - stepping through the channel list, selection by number, from the on-screen channel list, and using the electronic programme guide (EPG). 1. Stepping through the channel list To move through the channel list, press the pq buttons on the remote control.
Forgotten menu lock code Contact local Service Hotline or send email to our Support via www.strong.tv After moving the receiver The aerial feed former new point Try a direct feed from the to another room, you find...
Audio playback – MP3 and WMA Picture view – JPEG format STROng declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EEC and 73/23EEC; RohS 2002/95EEC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change.
Need help?
Do you have a question about the SRT 5001 ECO and is the answer not in the manual?
Questions and answers