Digital interactive terrestrial mhp receiver (17 pages)
Summary of Contents for Strong SRT 5302
Page 1
Digital Terrestrial Receiver SRT 5302 User manual Bedienungsanleitung Manuel d’utilisation Manuale utente Manual del usuario Návod k obsluze Upute za korištenje...
Page 4
€ 0,14/Min. deutsches Festnetz 801 702 017 € 0,42/Min. max. Mobilfunknetze support_pl@strong.tv +380(44)228 24 73 support_dk@strong.tv support_ua@strong.tv www.strong.tv Supplied by STRONG & Co, Japan Represented by STRONG Ges.m.b.H. Franz-Josefs-Kai 1 1010 Vienna Austria Email: support_at@strong.tv 25 Dec 2014 12:13...
7.0 TRoUBlE ShooTINg 8.0 SPECIfICATIoNS STRoNg declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EC and 73/23/EC, RohS 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change.
Attachments – For your safety and to avoid damaging the product, use only accessories recommended by STRONG. Water and Moisture – Never use this product around water (near a bathtub, kitchen sink, laundry tub, wet basement, swimming pool or in the rain).
PART 1 • English heat – Never use or store this product near any heat source such as a radiator heat register, stove, or any type of equipment or appliance that generates heat, including stereo amplifiers. Servicing – Refer all servicing to qualified personnel. Attempting to remove the covers or disassemble the product, could expose you to dangerous high voltage points.
the receiver. Always make backups of data on USB storage device before usage with receiver. STRONG will not take responsibility for any loss of information or circumstances caused by loss of information. 2.0 CoNNECTIoN 2.1 Connecting to Tv and Terrestrial Antenna Fig.
PART 1 • English 1. ANT IN To connect an antenna for reception of broadcasting signal. Active antennas can be supported with max. 5 V/50 mA DC. 2. To Tv To connect a TV set or to connect an extra receiver. 3.
PART 1 • English 4.0 fIRST TIME INSTAllATIoN When using the receiver for the first time, the Easy Install menu appears. Use qp to select Region, OSD Language, Antenna Power and Scan Mode and tu to select options. Then use the qp buttons to move the focus to Search and press oK to proceed with the automatic channel scan.
PART 1 • English 5.1.1.2 find Press the button 2 in to enter the Find menu. Use the qptu buttons to highlight letters or numbers and press oK to insert. After each character, the channel list will search the channel according to your input and list the matching channel. Press EXIT to quit the Find mode.
PART 1 • English 5.2 Installation 5.2.1 Auto Scan 1. Use the qp buttons to select Installation and press oK to enter the menu. 2. Use qp to select Auto Scan and press oK to enter the menu. 3. Change the Scan mode with tu. Use qp to highlight Search and press oK to start auto scan.
PART 1 • English 5.3.2 Subtitles preference This menu allows you to set the preferred Subtitles Language and to switch Subtitles Type between Normal and Hard of Hearing. 5.3.3 Tv System This menu allows to setup different settings concerning your TV set. Display Mode: PAL/NTSC/AUTO Aspect Ratio:...
5.4.1 Receiver Information This menu displays relevant receiver information like the receiver model, software version, signature, and our website www.strong.tv. 1. In the Tools menu, select Receiver Information and press oK to open receiver information. 2. Press EXIT to leave.
This receiver is equipped with an over the air update function, which might not be operational in your broadcast region. For further details visit our website www.strong.tv or contact your local Service line. 5.5 Media+ Select Media+ and press oK to enter the Media+ menu.
If the receiver does not work properly after checking it, please contact your local Service line or STRONG dealer. Alternatively you can send a support mail via our website: www.strong.tv. Do NoT open the receiver cover. It may cause a dangerous situation and will void the warranty.
Remote batteries exhausted Replace remote batteries Forgotten PIN code Contact local Service Hotline or send email to our Support via www. strong.tv After moving the receiver Antenna signals are too weak Press the INfo button on remote to another room / area...
Page 18
Audio playback: MP3, WMA* Picture view: JPEG, BMP* *STRONG cannot guarantee the playback of files although extensions are listed, as it depends on codec used, data bit rate and resolution (all MPEG codec formats are supported). Memory and System: Flash memory:...