Getting Started; First-Time Use - Strong SRT 5405 User Manual

Getting Started

First-time use

Once you have connected the
1. Turn on the television.
2. Plug the
3. Turn on the
diagram on page 7).
4. Select the video or AV input channel to which the
by pressing the TV/AV or VIDEO button on your TV remote control. (Refer to your TV user's
manual for instructions.)
The Strong Technologies banner appears on your TV screen, followed by a message asking if
you want to automatically search for channels and stations. (If you don't see the banner and
message, press EXIT and then FORMAT on the remote control until you do.)
5. To search for available channels and stations, press OK on the remote control. The Auto window
appears and the searching begins.
If you want to search for channels and stations yourself, s ee "Rescanning for channels and
stations" on page 25 for instructions and ignore the rest of this procedure.
As channels and stations are found, they are displayed on the Auto window.
When the
TV stations found will appear on the screen.
NOTE: You can now start watching digital TV stations and listening to digital radio stations.
However, there are settings that you should consider that will improve your enjoyment of
your . These are explained in "User Settings" on page 28. But if you want to start
watching TV straight away, see "Basic operations " on page 16 for instructions.
to your antenna and to your television, you need to:
into mains power and turn on the power at the mains switch.
using the power-on switch on the back of the receiver (number 10 in the
can find no more channels and stations, the search ends and one of the
is connected: this can be done
15