Table of Contents
Advertisement
A-B repeat
The A-B repeat function allows you to set playback to run from one point to another so that you
can watch that block in a continuous loop. This is handy when you want to play your favourite
scenes over and over.
1. During playback mode, press
2. Press
or
to locate the start of the section that you want to repeat in a continuous loop.
3. Press
to mark the start point for the loop.
4. Press VOL
(or
) to move to the location where you want to end the loop.
5. Press
to mark the end point for the loop. The program will play the selected block
repeatedly.
6. To stop the looping and resume normal viewing, press EXIT.
Cutting data
The cutting data function allows you to delete sections of a recorded file.
1. During playback mode, press the play button on the remote control. The progress bar appears.
2. Press forward or rewind to locate the start of the section that you want to delete.
3. Press
to mark the start point of the section.
4. Press VOL
(or forward) to move to the location where the section ends.
5. Press
to mark the end point of the section.
6. A message appears asking whether you want to save, cut or cancel. Press VOL
selection and then press OK.
Bookmarks and Scene Indexes
The bookmark function allows you to mark a location within a file so that you can jump to that
location quickly. To create a bookmark, the file must be in playback mode.
TIP: When you stop playback of a recorded program, you can bookmark the location so you
can continue to watch from that location when you resume playback.
To create a bookmark
During playback mode, press
bookmark icon will briefly appear in the upper right hand corner of the screen.
on the remote control. The progress bar appears.
at each desired scene. Each time you create a bookmark, the
47
to make your
Advertisement
Table of Contents
