Recording And Playback; Recording; Timeshift Recording Mode - Strong SRT 5392 User Manual

Recording and Playback

Recording

The SRT 5392 has an in-built 250GB hard-disk onto which you can record programs. You can record
a single program or several programs at the same time, depending on the recording mode. There
are four recording modes:
•

Timeshift recording mode

• Instant recording mode
• Normal recording mode
• Timer recording mode
NOTE: In timeshift recording mode, the program is recorded in a memory buffer, not onto the
hard disk. In other modes, programs are recorded onto the hard disk.
Timeshift recording mode
Timeshift recording mode automatically records up to two hours of whatever you are watching. In
this mode, you can watch a live TV program and use the time shift functions to return to an earlier
part of that live program. You can then play back that earlier part, and then catch up with the live
program. For detailed instructions, see "Timeshift" on page 49.
There are two ways to enable or disable timeshift recording.
Method 1
Press TIMESHIFT on the remote control.
If timeshift recording mode was disabled, pressing TIMESHIFT enables it and sets the maximum
recording duration to the default value of 2 hours. (If you want a different recording duration,
follow method 2 below.)
If timeshift recording mode was enabled, pressing TIMESHIFT disables it.
Method 2
1. Press MENU to display the main menu.
2. Press VOL or VOL
3. Press CH ▼or CH ▲ to select HDD Option and then press OK. The HDD option screen appears.
4. Highlight Timeshift and press VOL
until HDD is selected.
or VOL to set the mode to Enable (or Disable).
40