Zooming In Or Out - Strong SRT 5392 User Manual

Viewing PIP
Press on the remote control. A secondary picture (the PIP window) appears on the screen,
showing another channel (or a program being played back).
Press again. The secondary picture becomes smaller. If you press
window disappears.
Changing the position of the PIP window
Press on the remote control. The PIP window moves from one corner of the screen to another.
Continue pressing to move the PIP window in a cycle around the main screen.
Changing the PIP channel
You can view the main channel or the PIP channel.
1. To change the main channel (that is, the channel in the primary window), press CH ▼or CH ▲.
2. To change channels on the PIP screen, press
▲ to select the channel, and then press OK.
Switching between the main window and the PIP window
Press to switch the programs in the PIP window and the main window. For example, if the main
window is showing a channel 7 program and the PIP window is showing a channel 9 program,
pressing shows the channel 9 program in the main window and the channel 7 program in the PIP
window.

Zooming in or out

You can zoom in our out on part of the display (whether the display is paused or not).
To zoom in (or out):
1. Press EXIT on the remote control.
The corners of a rectangle (coloured yellow) appear on the screen. The contents of this zoom
rectangle will fill the screen when you complete the zoom operation.
a third time, the secondary
. The PIP channel list appears. Press CH ▼or CH
38