Table of Contents
Advertisement
The table below shows the settings that you can set for the print.
[42] Settings for the Print
Settings for
Settings
'Print '
'Target'
'Type'
'Output'
'Destination'
'Sort'
'Staple'
'Offset
stacked'
'Paper'
'Paper'
The Copy Function
Definition
'Paper'. This setting indicates that you send
the document directly into the job queue.
'Memory'. This setting indicates that you
have sent the document to memory.
'File'. This setting is optional. It is only
available if the Scan-to-file function is ac-
tive. The setting indicates that you can gen-
erate a digital file that is sent to the scan
server.
This setting indicates the destination of the
prints. The destination can be the output
trays, the upper output tray or the external
finisher (if configured).
This setting indicates that the prints are
sorted by set or by page.
This setting indicates that the prints are sta-
pled or not stapled. You can select 1 staple,
2 staples and no staples.
The staple setting is only available when
you select 'Output trays' as destination.
The position of 1 staple depends on
Note:
the selected document type (landscape
stapling possible).
This setting indicates that sets go into the
output trays in offset stacks or straight
stacks.
'Yes'. Each set has an offset.
'No'. Only the first set has an offset (every
new job has an offset)
The setting 'Paper' displays the list of all
media in the media catalog. This media cat-
alog is a list of all the media types that your
®
Océ VarioPrint
2100/2110 can use. Use
the star arrow keys
type to use for your job.
to select a media
143
Advertisement
Table of Contents
