Portrait original, short edge feed
Hold the original in front of you in readable position.
Rotate the original 90 degrees counter-clockwise.
Turn the original over the long edge.
Place it into the automatic document feeder or on the glass plate.
Landscape original, short edge feed
Hold the original in front of you in readable position.
Turn the original over the short edge.
Place it into the automatic document feeder or on the glass plate.
If you are scanning an original in which the long edge size is greater
Note:
than the vertical glass plate size, you must always use a short edge feed. Long
edge feed does not fit into the automatic document feeder.
Glass plate position
[52] Glass plate position
Component
[51] Glass plate scan
portrait
[52] Glass plate scan
landscape
[52] Glass plate position
If you are scanning an original in which long edge size is greater than
Note:
the vertical glass plate size, you must always scan the original in horizontal
position.
The Scan Function (optional)
Function
[51] Glass plate scan
Scan a portrait document in vertical position on the glass
portrait
plate.
[52] Glass plate scan
Scan a landscape document in horizontal position on the
landscape
glass plate.
187