Table of Contents
Advertisement
How to use the zoom function for originals in the automatic document feeder
Put the originals face down and in readable form into the automatic document
1.
feeder.
Select 'Scan'.
2.
Select one of the scan profiles in the 'Scan profiles' section.
3.
Select 'Edit...' to define the zoom value and if necessary the size of the target
4.
scan.
Press the start key (
5.
Result
The procedure above will result in a scan that is focused on the center of the
original. In the following table, the result is shown.
[55] Zooming from the automatic document feeder
Illustration
[55] Zooming from the automatic document feeder
The illustration below displays an example of the feedback on the operator
panel. The information on the target scan is enlarged and the paper size is
The Scan Function (optional)
) or the set-build key (
) to start the scan process.
Description
The original is placed face down
and in readable form into the auto-
matic document feeder.
The center of the original is a fixed
point and is used as the origin of
the image.
Result of a scan with a 100% zoom
factor.
Result of a scan with a 50% zoom
factor.
The center of the image is
Note:
fixed.
Result of a scan with a 200% zoom
factor.
The center of the image is
Note:
fixed.
197
Advertisement
Table of Contents
