Table of Contents
Advertisement
How to create a basic scan-to-email job
Prepare your originals for the scanning process, like described in the procedure
1.
above.
Press the Start key
2.
Enter the user code.
3.
Confirm the user code.
4.
After the scanning process is completed, remove the originals from the original
5.
output tray.
Result
The Océ VarioPrint
originals. This digital document is attached to an email message. The email
message is then sent to the mail server.
How to create one digital document from different scanned sets of originals
Prepare the first set of originals for the scanning process, like described in the
1.
procedure above.
You can use only the automatic document feeder to combine different sets
Note:
of originals.
Press the Set-build key
2.
Enter the user code.
3.
Confirm the user code.
4.
After the scanning process is completed, prepare the next set of originals for
5.
the scanning process.
Press the Set-build key
6.
Repeat steps 5 and 6 until all sets are scanned.
7.
Press the Start key
8.
Remove the originals from the output receiving tray.
9.
Result
The Océ VarioPrint
sets of originals. This digital document is attached to an email message. The
email message is then sent to the mail server.
The Scan Function (optional)
to start the scan-to-email job.
®
2100/2110 creates a digital document from the scanned
to scan the first set of originals.
to scan the second set of originals.
to create the digital document.
®
2100/2110 creates one digital document from the scanned
193
Advertisement
Table of Contents
