Oce VarioPrint 2100 User Manual page 20

The system goes into low power mode in the following situation:
[6] System Goes into the Low Power Mode
1
[6] System Goes into the Low Power Mode
The system returns from the low power mode in the following situations:
[7] System Returns from the Low Power Mode
1
2
[7] System Returns from the Low Power Mode
The system needs 30 seconds to warm up.
Note:
Sleep mode
When the system is in sleep mode, the power consumption is decreased to a
very low level.
The operator panel on the printer is off. The On/Off button
is amber.
20 Océ VarioPrint
When
The job queue of the Océ VarioPrint
a defined time.
This time is defined in the Océ Settings Editor. The key
Note:
operator can set a time between 1 and 240 minutes in increments of
1 minute. The factory default is 15 minutes.
When
You press a key on the operator panel
You send a print job.
Sometimes the system remains in the low power mode when you
send a print job. This event can occur when the print job is forced to
the mailbox.
®
2100/2110 User's Manual
® 2100/2110 has been empty for
on the printer