How to combine subsets into 1 file
Put your first subset into the automatic document feeder, or put the first
1.
original on the glass plate.
Press the 'Scan' function key.
2.
Select a scan profile.
3.
If necessary, press the key for 'Edit...' to change the settings for the subset.
4.
You can change some settings for 'Original' and 'Scan'(see 'Introduction to the
scan-to-file function' on page 174).
Press the Set-build key
5.
The first subset is scanned.
Prepare and scan the following subsets as described in the steps 2 -5 above.
6.
Press the Start key
7.
The job is exported to a file.
The Scan Function (optional)
.
after you scanned the last subset.
195