Table of Contents
Advertisement
If you select another copy template than 'Scan to memory', you can also
Note:
scan your job to memory. You must define the destination in the 'Target' section
of the job editor.
[44] The Copy Templates
Copy template
'Standard job'
'Front&back cover'
'Front cover'
'Last used'
'Scan to memory'
[44] The Copy Templates
Before you begin
Remove all staples from your originals.
Remove the paper clips.
Make sure that the originals in the automatic document feeder have the
same size.
Make sure that the automatic document feeder does not contain more than
75 sheets (80 g/m
Make sure that the originals are not curled.
The Copy Function
Description
All the settings are the system default set-
tings. You can define all the required set-
tings.
All the settings which are required for copy
jobs that contain front and back covers are
pre-defined. You can define the other set-
tings for your job.
All the settings which are required for copy
jobs that contain front covers are pre-de-
fined. You can define the other settings for
your job.
The settings of the previous copy job will be
used for your current copy job.
This copy template does not contain
Note:
the settings of all the subsets of a set-build
job.
All the settings which are required to scan a
job now and print it later are pre-defined.
You can define the other settings for your
job.
2
or 20 lb bond).
157
Advertisement
Table of Contents
