Oce VarioPrint 2100 User Manual page 140

The table below shows the settings for originals in the automatic document
feeder or originals on the glass plate.
[41] Settings for the Original
Settings for
'Original'
'Source'
'Sheet'
'Layout'
140 Océ VarioPrint
Settings Definition
'Type' This setting is read-only.
'Paper'
The originals are scanned from the glass plate
or the automatic document feeder.
'Memory'
'Mailbox'
'Orientation' This setting is read-only for the originals to be
scanned from the automatic document feeder.
You can change this setting if you scan the
original from the glass plate and the original is
small enough to be scanned in two directions.
(You can scan Tabloid in only one direction on
the glass plate).
'Size' This setting is read-only for the originals to be
scanned from the automatic document feeder.
Select one of the preferred paper sizes in the
list if you copy from the glass plate.
'User-de- You can define the size of the 'Long edge' and
fined' the size of the 'Short edge' of the original.
'Original' You can indicate if the originals are 1-sided or
2-sided.
®
2100/2110 User's Manual
If you select a template this setting will be
set to 'Paper'.
The document was scanned to memory or
moved from the job queue to the memory.
You edit a mailbox job. This job comes
from the network and was created in the
printer driver.