Oce VarioPrint 2100 User Manual page 190

Create a combined scan-to-file job with the Set-build function
Divide your document in different sets.
1.
The document is either too large to scan as 1 set or contains sheets of a different
size or paper type.
Put the first set of originals face down in the automatic document feeder or on
2.
the glass plate.
Select 'Scan'.
3.
Select one of the profiles from the list with scan profiles.
4.
You can only select 1 scan profile for all the subsets to come.
Note:
Select 'Edit...' to access the job settings for the scan-to-file job.
5.
You can also skip the 'Edit...' option and press the Set-build key
6.
subset is scanned.
Repeat the steps for the next subsets and press the Set-build key
7.
When you have scanned the last subset, you can press the Start key
8.
Result
After you start the scan-to-file job, the job is scanned and the digitized result
is sent to the scan server. The file is stored in a designated directory. The file
is stored under the predefined name.
There is no message on the operator panel to inform you that the file was stored
successfully. You can access the status information on the Océ Smart Imager
through the Océ VarioPrint
190 Océ VarioPrint
®
2100/2110 Settings Editor.
®
2100/2110 User's Manual
. The first
again.
.