Table of Contents
Advertisement
Result
After you press the set-build key for the second time, a message appears. An
empty page is detected.
The last page of the first subset is printed on the front of a sheet. The back of
the sheet is empty. You can select to print on the empty page, or not.
[41] Empty page detected dialog box
[41] Empty page detected dialog box
[43] Keep empty page settings
If you select
'Yes, start on new sheet'
'No'
'Whole document'
'This subset'
[43] Keep empty page settings
How to finish your document
Finish the settings of the subsets.
1.
Select 'Output' to define the settings for 'Destination', 'Sort', 'Staple' and 'Offset
2.
stacked'.
Set the number of copies with the numeric keys on the keyboard.
3.
Press the start key to print the whole document.
4.
The Copy Function
Then
The first subset has an empty back
side, which is not used. The next sub-
set starts on a new sheet.
The next subset starts on the back
side of the last sheet of the previous
subset. There is no empty page be-
tween the two subsets.
The next subsets all have the same
setting.
The setting is used for this subset
only.
149
Advertisement
Table of Contents
