Table of Contents
Advertisement
Configure the recipient search - LDAP server
[50] Recipient search settings - LDAP server
Recipient search
settings - LDAP
server
Address source
Server address
Port number
User name
Password
Search base
The Scan Function (optional)
Description
The source that contains the list of user codes and
email addresses. This source can be the LDAP server
or an address list file. When you have no LDAP serv-
er, you must upload an address list file.
Default: LDAP
Enter the address of one LDAP server. This address
can be a host name of 32 characters or an IP address.
Default: Empty
Default: 389
The user name gives you access to the server. This
user name can be any name of up to 20 characters
(a-z, A-Z , 0-9, _).
Default: Empty
The password can be any word of up to 20 characters
(a-z, A-Z, 0-9, _). Each character that you enter is
shown as an *.
Default: Empty
Define the path to the search base. The search base is
the area in which an email address is searched. The
search base can be any data file that contains at least
unique identifiers for the users and email addresses.
The search is from top to bottom only. You must en-
ter the top node of the search base to enter the data in
the file.
Default: Empty
183
Advertisement
Table of Contents
