Table of Contents
Advertisement
reduced compared with the settings for the original. The result is a situation
where information loss occurs. The feedback on the operator panel gives a
rough indication how the information is visible on the target scan. In this
situation, the information in center of the original is visible, but the edges of
the original are lost.
[54] Information loss, automatic document feeder
[54] Information loss, automatic document feeder
How to use the zoom function for originals on the glass plate
Put the original face down and in readable form in the upper left-hand corner
1.
on the glass plate.
Select 'Scan'.
2.
Select one of the scan profiles in the 'Scan profiles' section.
3.
Select 'Edit...' to define the zoom value and if necessary the size of the target
4.
scan.
Press the start key (
5.
198
Océ VarioPrint
) or the set-build key (
®
2100/2110 User's Manual
) to start the scan process.
Advertisement
Table of Contents
