Oce VarioPrint 2100 User Manual page 25

In the table below you will find the status indicators of the LED in the On/Off
button and the status indicators of the LEDs on the right-hand side of the
operator panel.
When the system is in the sleep mode, you must wake up the system to
Note:
process the jobs (see 'The Power Modes' on page 19).
[10] System State Indicators
Power state
Off
Controller initializing
Sleep mode
Safety sleep mode
Fatal error
Permanent error
Machine recoverable error
Low power mode
System initializing
System warming up
Stand-by mode
Process an automatic or interactive print
job
Operator recoverable error
Run-time contradiction
[10] System State Indicators
How to turn on the Océ VarioPrint
Press the power switch
1.
The system starts up. The following occurs:
The LEDs on the operator panel blink.
The screen of the operator panel is off / black.
The amber LED in the On/Off button
Wait until the system asks you to press the On/Off button
2.
Press the On/Off button
3.
The LED in the On/Off button
Turning the System On and Off
®
2100/2110
.
.
changes from amber to green.
On/Off button
Off
Amber blinking
Amber
Green
blinks.
.
25