Table of Contents
Advertisement
How to prepare your originals
Jog the subset of originals carefully to make a straight stack.
1.
Put the stack face down and in the readable form into the automatic document
2.
feeder.
If necessary, adjust the original guides.
3.
Press the key for a template, for example 'Standard job'.
4.
Press the key for 'Original'.
5.
Define the settings for the original.
6.
Press the key for 'Print '.
7.
Define the settings for the document to print.
8.
How to scan the subset
Press the set-build key (
1.
Result
The originals in the automatic document feeder are scanned. The originals are
added to the other subsets. You can see the number of scanned subsets on the
screen in the feedback area. The screen also displays extra feedback for tabs
and inserts.
When you are building a set, the next subset starts with the settings of the
Note:
previous subset. To process the new subset in a different method, you must
define new settings.
How to finish your combined document
Wait for the scan job to finish.
1.
Define the settings for the next subset.
2.
Scan the next subset.
3.
Repeat the steps 1, 2 and 3 above to scan more subsets.
4.
Select 'Output' to define the settings for Destination, Sort order, Staples and the
5.
Stacking method.
Set the number of copies with the numeric keys on the keyboard.
6.
Press the start key (
7.
queue) or to send the job to the local mailbox.
When you press the start key, the selected output settings and number of
Note:
copies apply to the whole job.
162
Océ VarioPrint
).
) to print the whole document (add the job to the job
®
2100/2110 User's Manual
Advertisement
Table of Contents
