Table of Contents
Advertisement
Illustration
[53] The scan profiles
[53] The scan profiles
Create a simple scan-to-file job
Put the originals face down in the automatic document feeder or on the glass
1.
platen.
Select 'Scan'.
2.
Select one of the scan profiles from the list.
3.
Select 'Edit...' to access the job settings for the scan-to-file job.
4.
You cannot edit all settings. The fixed settings are grayed out. If there is
Note:
no need to change the scan-to-file settings, you can ignore this step and
continue with the next step.
Press the Start key
5.
If you do not use the 'Edit...' function, you can use the Start key
Note:
start the scan-to-file job.
The Scan Function (optional)
to start the scan-to-file job.
to
189
Advertisement
Table of Contents
