Drive Set Up Group; Table 21 Drive Set Up Group Parameters - Honeywell 2000 Series Installation, Operation And Maintenance Manual

Set Up and Calibration Procedures

Drive Set Up Group

Drive Set Up Group
Table 21 lists the parameters and selections available for the SET DRVINF group.
Actuator Lower
Display
Prompt
VERSON
SPEED
(150 ° @ 60hz)
SPEED
(90 ° @ 60hz)
SPEED
(150 ° @ 50hz)
SPEED
(90 ° @ 50hz)
POWER
ROTATE
TAG
DMFG
56 HercuLine™ 2000 Series Actuator - Installation, Operation and Maintenance Manual

Table 21 Drive Set Up Group Parameters

Selections or
Range of Setting
FIRMWARE VERSION — Read Only. Displays the firmware
nnnn
version currently in use by the actuator's CPU.
STROKE SPEED — Read Only. The speed is the number of
6 S
seconds it takes for the actuator shaft to move its full range
12 S
of travel.
25 S
50 S
75 S
STROKE SPEED — Read Only. The speed is the number of
3.2 S
seconds it takes for the actuator shaft to move its full range
7.2 S
of travel.
15 S
30 S
45 S
STROKE SPEED — Read Only. The speed is the number of
7.5 S
seconds it takes for the actuator shaft to move its full range
15 S
of travel.
30 S
60 S
90 S
STROKE SPEED — Read Only. The speed is the number of
4.5 S
seconds it takes for the actuator shaft to move its full range
9 S
of travel.
18 S
36 S
54 S
POWER INPUT VOLTAGE AND FREQUENCY — Read
Only. Selects the power input voltage and line frequency of
the actuator.
1206 — 120Volts, 60Hz
1206
1205 — 120Volts, 50Hz
1205
2206 — 220Volts, 60Hz
2206
2205 — 220Volts, 50Hz
2205
ROTATION — Indicates the factory calibrated degrees of
rotation.
90 — Factory calibrated for 90 degrees of rotation.
90
150 — Factory calibrated for 150 degrees of rotation.
150
TAG NAME — Selects the tag name or identifier of the
nnnnnn
actuator. Up to 6 alphanumeric characters. See "Set Tag
Name" on next page.
MANUFACTURING DATE — Read Only. Displays date
mmddyy *
code of manufacture for actuator.
or
ddmmyy
Parameter Definition/PDA HercuLink
®
Prompt
Revision 6
7/07