Tracedump - Brocade Communications Systems Brocade 8/12c Command Reference Manual

Brocade fabric os command reference manual supporting fabric os v6.4.0 (53-1001764-01, march 2010)
Hide thumbs Also See for Brocade 8/12c:
Table of Contents

Advertisement

2

traceDump

traceDump
Initiates, or removes a trace dump or displays the trace dump status.
Synopsis
tracedump [-S ]
tracedump -n [-s slot]
tracedump -r [-s slot] | -R
tracedump -c [-s slot]
Description
Use this command to initiate a background trace dump, to remove the content of a trace dump, or
to display the dump status on the switch.
When executed without operands, this command defaults to traceDump -S.
Execution of traceDump –n generates a local trace dump locally. Use supportSave to transfer the
local trace dump to a remote host. When supportSave is used, the default remote file name format
for the trace dump file is as follows:
chassisname-S#-YYYYMMDDHHMMSS.<new | old>.tracedump.dmp.gz
S#
YYYYMMDDHHMMSS
new | old
dmp.gz
Note
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands
This command has the following mutually exclusive operands:
-S
-n
-r
-R
-c
This command has the following optional operand:
-s slot
Examples
To initiate a background trace dump from slot 5:
972
Indicates the slot number (0 on standalone platforms)
Indicates the trace dump time stamp (year-month-day-hour-minute-second).
Indicates a new or an old trace dump file.
The compressed trace dump archive file extension.
Displays the trace dump status This operand is optional. If omitted, the same
status information is displayed.
Initiates a background trace dump.
Clears the status of a particular trace dump on a specified slot.
Clears the status of a particular trace dump on all slots.
Clears all trace dump buffers. This operation resets the trace buffer contents.
Specifies the slot number from which a trace dump is generated. If a slot is
not supplied, the trace dump is generated from the local slot. This operand is
optional.
switch:admin> tracedump -n -s 5
Fabric OS Command Reference
53-1001764-01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Brocade 8/12c and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Fabric os v6.4.0

Table of Contents