HP 6125XLG Command Reference Manual page 133

Views
ICMP echo operation view, UDP echo operation view
Predefined user roles
network-admin
Parameters
item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.
threshold-type: Specifies a threshold type.
accumulate accumulate-occurrences: Checks the maximum number of threshold violations, in the range
of 1 to 15.
average: Checks the average probe duration.
consecutive consecutive-occurrences: Specifies the number of consecutive threshold violations after the
NQA operation starts. The value is in the range of 1 to 16.
threshold-value: Specifies threshold range in milliseconds.
upper-threshold: Specifies the upper limit, in the range of 0 to 3600000.
lower-threshold: Specifies the lower limit, in the range of 0 to 3600000. It must not be greater than the
upper threshold.
action-type: Specifies what action to be triggered. The default action is none.
none: Specifies the action of only displaying results on the terminal display.
Usage guidelines
You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use undo
reaction to delete the entry first and reconfigure a new one.
Only successful probe packets are monitored. Statistics about failed probe packets are not collected.
Examples
# Create reaction entry 1 for monitoring the average probe duration of ICMP echo operation, setting the
upper limit to 50 milliseconds and lower limit to 5 milliseconds. Before the NQA operation starts, the
initial state of the reaction entry is invalid. After the operation, the average probe duration is checked. If
it exceeds the upper limit, the state is set to over-threshold. If it is below the lower limit, the state of the
reaction entry is set to below-threshold. Once the state of the reaction entry changes, the result is
displayed on the terminal.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] reaction 1 checked-element probe-duration
threshold-type average threshold-value 50 5 action-type none
# Create reaction entry 2 for monitoring the probe duration of ICMP echo operation, setting the upper
limit to 50 milliseconds and the lower limit to 5 milliseconds. Before the NQA operation starts, the initial
state of the reaction entry is invalid. After the operation, the accumulated probe duration is checked
against the threshold range. If the total number of threshold violations exceeds 10 (included), the state of
the entry is set to over-threshold. If it is below the lower threshold, the state of the entry is set to
below-threshold. Once the state of the reaction entry changes, the result is displayed on the terminal.
<Sysname> system-view
[Sysname] nqa entry admin test
131