History-Record Enable - HP 6125XLG Command Reference Manual

Default
The interval between two consecutive operations of other types is 0 milliseconds. That is, only one
operation is performed.
Views
Any NQA operation view
Predefined user roles
network-admin
Parameters
interval: Specifies the interval in milliseconds between two consecutive operations, in the range of 0 to
604800000. An interval of 0 milliseconds sets NQA to perform the operation only once, and not to
generate any statistics.
Usage guidelines
If an operation is not completed when the interval is reached, the next operation does not start.
Examples
# Configure the ICMP echo operation to repeat at an interval of 1000 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] frequency 1000

history-record enable

Use history-record enable to enable the saving of history records for the NQA operation.
Use undo history-record enable to disable the saving of history records.
Syntax
history-record enable
undo history-record enable
Default
The saving of history records is disabled for the NQA operation.
Views
ICMP echo operation view, UDP echo operation view
Predefined user roles
network-admin
Usage guidelines
To display the history records of the NQA operation, use the display nqa history command.
The undo form of the command disables the system from saving the history records for the NQA
operation and removes existing history records.
Examples
# Enable the saving of history records for the NQA operation.
<Sysname> system-view
124