Tracert Ipv6 - HP 6125XLG Command Reference Manual

# Trace the path to destination (192.168.0.46) over an MPLS network.
<Sysname> tracert 192.168.0.46
traceroute to 192.168.0.46(192.168.0.46), 30 hops at most, 40 bytes each packet, press
CTRL_C to break
1 192.0.2.13 (192.0.2.13)
2 192.0.2.9 (192.0.2.9)
MPLS Label=100048 Exp=0 TTL=1 S=1
3 192.0.2.5 (192.0.2.5)
MPLS Label=100016 Exp=0 TTL=1 S=1
4 192.0.2.1 (192.0.2.1)
Table 3 Command output
Field
traceroute to 1.1.2.2(1.1.2.2)
hops at most
bytes each packet
press CTRL_C to break
1 1.1.1.2 673 ms 425 ms 30
ms
MPLS Label=100048 Exp=0
TTL=1 S=1

tracert ipv6

Use tracert ipv6 to display the path that the IPv6 packets traverse from source to destination.
Syntax
tracert ipv6 [ -f first-hop | -m max-hops | -p port | -q packet-number | -vpn-instance vpn-instance-name
| -w timeout ] * host
Views
Any view
Predefined user roles
network-admin
0.661 ms 0.618 ms
0.861 ms 0.718 ms
0.822 ms 0.731 ms
0.961 ms 8.676 ms
Description
Display the route that the IP packets traverse from the current device to the
device whose IP address is 1.1.2.2.
Maximum number of hops of the probe packets, which can be set by the -m
keyword.
Number of bytes of a probe packet.
During the execution of the command, press Ctrl+C to abort the tracert
operation.
Probe result of the probe packets whose TTL is 1, including the IP address of
the first hop, and the roundtrip time of three probe packets.
The number of packets that can be sent in each probe can be set through the
-q keyword.
ICMP timeout packets on an MPLS network, carrying MPLS label information:
•
Label—Label value that is used to identify a forwarding equivalence class
(FEC).
•
Exp—Reserved, usually used for class of service (CoS).
•
TTL—TTL value.
•
S—MPLS supports multiple levels of labels. Value 1 indicates that the label
is at the bottom of the label stack, and value 0 indicates that the label is in
another label stack.
13
0.579 ms
0.679 ms
0.708 ms
0.875 ms