Info-Center Security-Logfile Enable; Info-Center Security-Logfile Frequency - HP 6125XLG Command Reference Manual

Usage guidelines
When the size of the security log file reaches the upper limit, the system deletes the oldest logs and then
writes new logs into the security log file. This feature helps avoid security log loss by setting an alarm
threshold for the security log file usage. When the threshold is reached, the system outputs log
information to inform the administrator. The administrator can log in to the device as the security log
administrator, and back up the security log file.
Examples
# Set the alarm threshold for the security log file usage to 90%.
<Sysname> system-view
[Sysname] info-center security-logfile alarm-threshold 90

info-center security-logfile enable

Use info-center security-logfile enable to enable saving of security logs into the security log file.
Use undo info-center security-logfile enable to restore the default.
Syntax
info-center security-logfile enable
undo info-center security-logfile enable
Default
The saving of security logs into the security log file is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This feature enables the system to output security logs into the security log file buffer, and saves the logs
from the buffer to the security log file at a specific interval.
Examples
# Enable saving security logs into the security log file.
<Sysname> system-view
[Sysname] info-center security-logfile enable

info-center security-logfile frequency

Use info-center security-logfile frequency to configure the interval for saving security logs to the security
log file.
Use undo info-center security-logfile frequency to restore the default saving interval.
Syntax
info-center security-logfile frequency freq-sec
undo info-center security-logfile frequency
68