HP 6125XLG Command Reference Manual page 73

Blade switch network management and monitoring
Table of Contents

Advertisement

Table 18 Default output rules
Destination
Console
Monitor terminal
Log host
Log buffer
Log file
Views
System view
Predefined user roles
network-admin
Parameters
module-name: Specifies a module by its name. For instance, to output FTP information, specify this
argument as FTP. You can use the info-center source ? command to view the modules supported by the
device.
default: Specifies all modules, which can be displayed by using the info-center source ? command.
console: Outputs logs to the console.
logbuffer: Outputs logs to the log buffer.
logfile: Outputs logs to the log file.
loghost: Outputs logs to the log host.
monitor: Outputs logs to the monitor terminal.
deny: Disables log output.
level severity: Specifies a severity level, in the range of 0 to 7. See
this keyword, you can specify the lowest severity level of the logs allowed/denied to be output.
Usage guidelines
This command sets an output rule for a specified module or all modules. For example, you can output IP
log information with a severity of at least warning to the log host, and output IP log information with a
severity of at least informational to the log buffer.
If you do not set an output rule for a module, the module uses the default output rule or the output rule set
by using the default keyword.
If you use the command multiple times, only the most recent output rule takes effect for the specified
module.
After you set an output rule for a module, you must use the module-name argument to modify or remove
the rule. A new output rule configured by using the default keyword does not take effect on the module.
Examples
# Output only VLAN module's information with a severity level of at least emergency to the console.
<Sysname> system-view
Source modules
All supported modules
All supported modules
All supported modules
All supported modules
All supported modules
71
Log
Enabled/disabled
Enabled
Enabled
Enabled
Enabled
Enabled
Table 13
for more information. With
Level
Debug
Debug
Informational
Informational
Informational

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents