Display Process Memory Heap Address - HP 6125XLG Command Reference Manual

Field
Total
Free Ratio
Related commands
display process memory
•

display process memory heap address

•
display process memory heap size
•
display process memory heap address
Use display process memory heap address to display memory content starting from a specified memory
block for a process.
Syntax
display process memory heap job job-id address starting-address length memory-length [ slot
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
job job-id: Specifies a user process by its job ID, in the range of 1 to 2147483647.
address starting-address: Specifies the starting memory block by its address.
length memory-length: Specifies the memory block length in the range of 1 to 1024 bytes.
slot slot-number: Specifies an IRF member device by its ID. Without this option, the command displays
memory content information on the master device.
Usage guidelines
When a user process runs abnormally, this command helps locate the problem.
Examples
# Display 128-byte memory block content starting from the memory block 0xb7e30580 for the process
job 1.
<Sysname> display process memory heap job 1 address b7e30580 length 128
B7E30580:
B7E30590:
B7E305A0:
B7E305B0:
B7E305C0:
B7E305D0:
B7E305E0:
B7E305F0:
Description
Total number of memory blocks.
Ratio of free memory to total memory. It helps identify fragment information.
14 00 EF FF 00 00 00 00 E4 39 E2 B7 7C 05 E3 B7
14 00 EF FF 2F 73 62 69 6E 2F 73 6C 62 67 64 00
14 00 EF FF 00 00 00 00 44 3B E2 B7 8C 05 E3 B7
14 00 EF FF 2F 73 62 69 6E 2F 6F 73 70 66 64 00
14 00 EF FF 00 00 00 00 A4 3C E2 B7 AC 05 E3 B7
14 00 EF FF 2F 73 62 69 6E 2F 6D 73 74 70 64 00
14 00 EF FF 00 00 00 00 04 3E E2 B7 CC 05 E3 B7
14 00 EF FF 2F 73 62 69 6E 2F 6E 74 70 64 00 00
171
.........9..|...
..../sbin/slbgd.
........D;......
..../sbin/ospfd.
.........<......
..../sbin/mstpd.
.........>......
..../sbin/ntpd..