Display Nqa Statistics - HP 6125XLG Command Reference Manual

network-operator
Parameters
admin-name operation-tag: Displays the result of an NQA operation. The admin-name argument
represents the name of the administrator who creates the NQA operation, and is a case-insensitive string
of 1 to 32 characters. The operation-tag argument represents the operation tag, and is a case-insensitive
string of 1 to 32 characters. If these two arguments are not specified, the command displays the result of
all NQA operations.
Examples
# Display the result of the UDP echo operation.
<Sysname> display nqa result admin test
NQA entry (admin admin, tag test) test results:
NQA entry (admin admin, tag test) test results:
Destination IP address: 192.168.0.58
Send operation times: 1
Min/Max/Average round trip time: 3/3/3
Square-Sum of round trip time: 9
Last succeeded probe time: 2011-01-01 03:15:12.6
Extended results:
Packet loss in test: 0%
Failures due to timeout: 0
Failures due to internal error: 0
Failures due to other errors: 0
Table 33 Command output
Field
Send operation times
Receive response times
Min/Max/Average round trip time
Square-Sum of round trip time
Last succeeded probe time
Failures due to timeout
Failures due to internal error
Failures due to other errors

display nqa statistics

Use display nqa statistics to display NQA operation statistics.
Syntax
display nqa statistics [ admin-name operation-tag ]
Views
Any view
Receive response times: 1
Description
Number of operations.
Number of response packets received.
Minimum/maximum/average round-trip time in milliseconds.
Square sum of round-trip time.
Time when the last successful probe was completed. If no probes are
successful in an operation, the field displays 0.
Number of timeout occurrences in an operation.
Number of failures due to internal errors.
Failures due to other errors.
121