HP 6125XLG Command Reference Manual page 57

Parameters
reverse: Displays log entries chronologically, with the most recent entry at the top. Without this keyword,
the command displays log entries chronologically, with the oldest entry at the top.
level severity: Specifies a severity level in the range of 0 to 7. Without this keyword, the command
displays log information for all levels.
Table 13 Log levels
Severity
value
0
1
2
3
4
5
6
7
size buffersize: Specifies the number of latest log messages to be displayed, in the range of 1 to 1024.
Without this keyword, the command displays all log information.
slot slot-number: Specifies an IRF member ID.
Examples
# Display the state and log information of the log buffer.
<Sysname> display logbuffer slot 1
Log buffer: Enabled
Max buffer size: 1024
Actual buffer size: 512
Dropped messages: 0
Overwritten messages: 0
Current messages: 127
%Jun 19 18:03:24:55 2006 Sysname SYSLOG /7/SYS_RESTART:System restarted
...
Table 14 Command output
Field
Log buffer
Level Description
The system is unusable. For example, the system
Emergency
authorization has expired.
Action must be taken immediately. For example, traffic on
Alert
an interface exceeds the upper limit.
Critical condition. For example, the device temperature
Critical exceeds the upper limit, the power module fails, or the fan
tray fails.
Error Error condition. For example, the link state changes.
Warning condition. For example, an interface is
Warning
disconnected, or the memory resources are used up.
Normal but significant condition. For example, a terminal
Notification
logs in to the device, or the device reboots.
Information Informational message. For example, a command or a
al ping operation is executed.
Debug Debugging message.
Description
•
Enabled—Logs can be output to the log buffer.
•
Disabled—Logs cannot be output to the buffer.
55
Corresponding
keyword in
commands
emergency
alert
critical
error
warning
notification
informational
debugging