Port mirroring commands
display mirroring-group
Use display mirroring-group to display mirroring group information.
Syntax
display mirroring-group { group-id | all | local | remote-destination | remote-source }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-id: Number of the mirroring group, in the range of 1 to 4.
all: Displays information about all mirroring groups.
local: Displays local mirroring group information.
remote-destination: Displays remote destination group information.
remote-source: Displays remote source group information.
Usage guidelines
Mirroring group information includes the type, status, and content of a mirroring group, and is sorted by
mirroring group number.
Examples
# Display information about all mirroring groups.
<Sysname> display mirroring-group all
Mirroring group 3:
Type: Local
Status: Active
Mirroring port:
Ten-GigabitEthernet1/1/5
Ten-GigabitEthernet1/1/6
Monitor port: Ten-GigabitEthernet1/1/7
Mirroring group 4:
Type: Remote source
Status: Incomplete
Mirroring port:
Ten-GigabitEthernet1/1/8
Remote probe VLAN: 1900
Inbound
Both
Both
189