Sflow Flow Collector; Sflow Flow Max-Header - HP 6125XLG Command Reference Manual

Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
collector-id: Specifies an sFlow collector by its ID in the range of 1 to 10.
Examples
# Specify sFlow collector 2 on Ten-GigabitEthernet 1/1/5 for counter sampling.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] sflow counter collector 2

sflow flow collector

Use sflow flow collector to specify an sFlow collector for flow sampling.
Use undo sflow flow collector to remove the sFlow collector for flow sampling.
Syntax
sflow flow collector collector-id
undo sflow flow collector
Default
No sFlow collector is specified for flow sampling.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
collector-id: Specifies an sFlow collector by its ID in the range of 1 to 10.
Examples
# Specify sFlow collector 2 on Ten-GigabitEthernet 1/1/5 for flow sampling.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] sflow flow collector 2

sflow flow max-header

Use sflow flow max-header to set the maximum number of bytes of a packet (starting from the packet
header) that flow sampling can copy.
Use undo sflow flow max-header to restore the default.
Syntax
sflow flow max-header length
146