Sflow Agent - HP 6125XLG Command Reference Manual

Field
Port
Aging
Size
VPN-instance
Description
Port information
Interface
CID
Interval(s)
FID
MaxHLen
Rate
Mode
Status

sflow agent

Use sflow agent to configure an IP address for the sFlow agent.
Use undo sflow agent to restore the default.
Syntax
sflow agent { ip ip-address | ipv6 ipv6-address }
undo sflow agent { ip | ipv6 }
Default
No IP address is configured for the sFlow agent. The device periodically checks whether the sFlow agent
has an IP address. If not, the device automatically selects an IPv4 address for the sFlow agent but does
not save the IPv4 address in the configuration file.
Views
System view
Predefined user roles
network-admin
Parameters
ip ip-address: Specifies an IPv4 address for the sFlow agent.
ipv6 ipv6-address: Specifies an IPv6 address for the sFlow agent.
Description
sFlow collector port.
Remaining lifetime of the sFlow collector. If this field displays N/A, the sFlow
collector never ages out.
Maximum length of the sFlow data portion in an sFlow packet.
Name of the VPN bound with the sFlow collector.
Description of the sFlow collector.
Information about interfaces configured with sFlow.
Interface configured with sFlow.
ID of the sFlow collector, for receiving counter sampled packets.
Counter sampling interval, in seconds.
ID of the sFlow collector for receiving flow sampled packets.
Maximum number of bytes that can be copied in a sampled packet (starting from
the packet header).
Number of packets out of which the interface samples a packet by using flow
sampling.
Flow sampling mode: Random, which samples a random number of packets.
Physical status of the port configured with sFlow:
•
Suspended—The port is down.
•
Active—The port is up.
143