Ttl - HP 6125XLG Command Reference Manual

Use undo tos to restore the default.
Syntax
tos value
undo tos
Default
The ToS value in the IP packet header of probe packets is 0.
Views
ICMP echo operation view, UDP echo operation view
Predefined user roles
network-admin
Parameters
value: Specifies the ToS value in the IP packet header, in the range of 0 to 255.
Examples
# Configure the ToS value in an IP packet header of probe packets as 1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] tos 1

ttl

Use ttl to specify the TTL for probe packets.
Use undo ttl to restore the default.
Syntax
ttl value
undo ttl
Default
The TTL for probe packets is 20.
Views
ICMP echo operation view, UDP echo operation view
Predefined user roles
network-admin
Parameters
value: Specifies the TTL for probe packets, in the range of 1 to 255.
Usage guidelines
The route-option bypass-route command sets the TTL to 1 for probe packets. The ttl command does not
take effect.
139