Route-Option Bypass-Route; Source Interface - HP 6125XLG Command Reference Manual

Usage guidelines
You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use undo
reaction to delete the entry first and reconfigure a new one.
Examples
# Create reaction entry 1. If the number of consecutive probe failures reaches 3, collaboration is
triggered.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type tcp
[Sysname-nqa-admin-test-tcp] reaction 1 checked-element probe-fail threshold-type
consecutive 3 action-type trigger-only
Related commands
Track (High Availability Command Reference)

route-option bypass-route

Use route-option bypass-route to enable the routing table bypass function to test the connectivity to the
direct destination.
Use undo route-option bypass-route to disable the routing table bypass function.
Syntax
route-option bypass-route
undo route-option bypass-route
Default
The routing table bypass function is disabled.
Views
ICMP echo operation view, UDP echo operation view
Predefined user roles
network-admin
Usage guidelines
When the routing table bypass function is enabled, the routing table is not searched, and packets are
sent directly to the destination in a directly connected network.
Examples
# Enable the routing table bypass function.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] route-option bypass-route

source interface

Use source interface to configure the source interface for ICMP echo request packets.
134