Probe Timeout; Reaction Checked-Element Probe-Duration - HP 6125XLG Command Reference Manual

[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] probe count 10

probe timeout

Use probe timeout to specify the probe timeout time.
Use undo probe timeout to restore the default.
Syntax
probe timeout timeout
undo probe timeout
Default
The timeout time of a probe is 3000 milliseconds.
Views
ICMP echo operation view, UDP echo operation view
Predefined user roles
network-admin
Parameters
timeout: Specifies the probe timeout time in milliseconds. The value range for the timeout argument is 10
to 3600000.
Usage guidelines
If a probe does not complete within the period, the probe is timed out.
Examples
# Set the probe timeout time for the ICMP echo operation to 10000 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] probe timeout 10000

reaction checked-element probe-duration

Use reaction checked-element probe-duration to configure a reaction entry for monitoring the probe
duration.
Use undo reaction to delete the specified reaction entry.
Syntax
reaction
accumulate-occurrences | average | consecutive consecutive-occurrences } threshold-value
upper-threshold lower-threshold [ action-type none ]
undo reaction item-number
Default
No reaction entry for monitoring the probe duration is configured.
item-number checked-element probe-duration
130
threshold-type { accumulate