Next-Hop - HP 6125XLG Command Reference Manual

Default
A maximum of 50 records can be saved for an NQA operation.
Views
ICMP echo operation view, UDP echo operation view
Predefined user roles
network-admin
Parameters
number: Specifies the maximum number of history records that can be saved for an NQA operation. The
value is in the range of 0 to 50.
Usage guidelines
If the number of history records for an NQA operation exceeds the maximum number, earliest history
records are removed.
Examples
# Set the maximum number of history records for an NQA operation to 10.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] history-record number 10

next-hop

Use next-hop to specify the next hop for the ICMP echo operation.
Use undo next-hop to remove the next hop IP address.
Syntax
next-hop ip-address
undo next-hop
Default
No next hop IP address is configured for the ICMP echo operation.
Views
ICMP echo operation view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the IP address of the next hop.
Examples
# Specify the next hop IP address as 10.1.1.1 for the ICMP echo operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] next-hop 10.1.1.1
126