Source Ip - HP 6125XLG Command Reference Manual

Use undo source interface to restore the default.
Syntax
source interface interface-type interface-number
undo source interface
Default
No source interface is configured for ICMP echo request packets.
Views
ICMP echo operation view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
If you configure both the source interface command and the source ip command, the source ip command
takes effect.
The specified source interface must be up. Otherwise, no ICMP echo requests can be sent out.
Examples
# Specify the IP address of interface VLAN-interface 2 as the source IP address of ICMP echo request
packets.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] source interface vlan-interface 2
Related commands

source ip

source ip
Use source ip to configure the source IP address for probe packets.
Use undo source ip to remove the configured source address. The IP address of the interface that sends
a probe packet serves as the source IP address of the probe packet.
Syntax
source ip ip-address
undo source ip
Default
No source IP address is configured for probe packets.
Views
ICMP echo operation view, UDP echo operation view
135