HP 6125G Command Reference Manual page 171

The time ID (time-id) must be unique in a job. If two time and command bindings have the same time ID,
the one configured last takes effect.
Use Table 31
Table 31 Command schedule options
Command
time timeid at time date command
command
time timeid one-off at time command
command
time timeid one-off at time month-date
month-day command command
time timeid one-off at time week-day
week-daylist command command
time timeid repeating at time command
command
time timeid repeating at time month-date
month-day command command
time timeid repeating at time week-day
week-daylist command command
Related commands: job and view.
Examples
# Schedule a job to save the configuration file a.cfg at 3:00 on May 18, 201 1.
<Sysname> system-view
[Sysname] job saveconfig
[Sysname-job-saveconfig] view monitor
[Sysname-job-saveconfig] time 1 at 3:00 2011/05/18 command save a.cfg
# Schedule a job to save the configuration file at 12:00 every day.
<Sysname> system-view
[Sysname] job saveconfig
[Sysname-job-saveconfig] view monitor
[Sysname-job-saveconfig] time 1 repeating at 12:00 command save a.cfg
# Schedule a job to save the configuration file at 8:00 AM on 5
executed in the second month if the time has passed.
<Sysname> system-view
[Sysname] job saveconfig
[Sysname-job-saveconfig] view monitor
[Sysname-job-saveconfig] time 1 one-off at 8:00 month-date 5 command save a.cfg
# Schedule a job to save the configuration file at 8:00 AM on 5
when you add commands in a job.
Description
Schedules a command to run at a specific time and date. The
time or date must be later than the current system time or date.
Schedules a command to run at a specific time on the current
day. If the specified time has passed, the command runs the next
day. The command runs only once.
Schedules a command to run at a specific day in the current
month. If the specified time or day has passed, the command
runs in the next month.
The command runs only once.
Schedules a command to run at a specific time on a specific day
or days in the current week. If the specified time or day has
passed, the command runs in the next week.
The command runs only once.
Schedules a command to run at a specific time every day.
Schedules a command to run on a specific day every month.
Schedules a command to run at a specific time in a specific day
or days every week.
th
th
164
in the current month, which might be
every month.