Ip Http Dscp; Ip Http Enable - HP 6125G Command Reference Manual

Examples
# Associate the HTTP service with ACL 2001 to only allow the clients within the 10.10.0.0/16 network to
access the device through HTTP.
<Sysname> system-view
[Sysname] acl number 2001
[Sysname-acl-basic-2001] rule permit source 10.10.0.0 0.0.255.255
[Sysname-acl-basic-2001] quit
[Sysname] ip http acl 2001

ip http dscp

Syntax
ip http dscp dscp-value
undo ip http dscp
View
System view
Default level
2: System level
Parameters
dscp-value: Specifies a DSCP value in the range of 0 to 63.
Description
Use ip http dscp to set the DSCP value for IPv4 to use for outgoing HTTP packets.
Use undo ip http dscp to restore the default.
By default, IPv4 uses the DSCP value 16 for outgoing HTTP packets.
Examples
# Set the DSCP value for IPv4 to use for outgoing HTTP packets to 30.
<Sysname> system-view
[Sysname] ip http dscp 30

ip http enable

Syntax
ip http enable
undo ip http enable
View
System view
Default level
2: System level
Parameters
None
31