Put; Pwd - HP 6125G Command Reference Manual

FTP: passive is on

put

Syntax
put localfile [ remotefile ]
View
FTP client view
Default level
3: Manage level
Parameters
localfile: Name of the local file to be uploaded.
remotefile: File name used after a file is uploaded and saved on the FTP server.
Description
Use put to upload a file on the client to the remote FTP server.
By default, if no name is assigned to the file to be saved on the FTP server, the name of the source file is
used.
When a file is uploaded, it is saved in the user's authorized directory, which can be set with the
authorization-attribute command on the remote server.
Examples
# Upload source file vrpcfg.cfg on the master to the remote FTP server and save it as ftpclient.cfg.
[ftp] put vrpcfg.cfg ftpclient.cfg
227 Entering Passive Mode (192,168,1,46,4,50).
125 ASCII mode data connection already open, transfer starting for /ftpclient.cfg.
226 Transfer complete.
FTP: 1366 byte(s) sent in 0.064 second(s), 21.00Kbyte(s)/sec.
# Upload source file a.cfg on the subordinate device (with the member ID 2) to the remote FTP server and
save it as ftpclienta.cfg.
[ftp] put slot2#flash:/a.cfg ftpclienta.cfg
227 Entering Passive Mode (192,168,1,46,4,52).
125 ASCII mode data connection already open, transfer starting for /ftpclienta.cfg.
226 Transfer complete.
FTP: 1226 byte(s) sent in 0.065 second(s), 18.00Kbyte(s)/sec.

pwd

Syntax
pwd
View
FTP client view
Default level
3: Manage level
74